프레스 브레이크의 압력 부족을 처리하는 방법
The Press Brake is the most popular machine in the sheet metal industry. During long-term use, the machine may fail to pressurize. In this article, we will provide the causes and solutions for this type of problem.
1. Hydraulic system problems
(1) Insufficient anti-wear hydraulic oil or poor oil quality.
The hydraulic system requires sufficient hydraulic oil to work properly. If the hydraulic oil is too little or the oil quality is poor, it will affect the normal operation of the system, resulting in the Press Brake not being pressurized. It is necessary to check the oil level and oil quality of the hydraulic oil in time, and add or replace the hydraulic oil in time.
(2) The oil pump fails.
The oil pump is the core component of the hydraulic system. If the oil pump fails, it will affect the normal operation of the system, resulting in the bending machine not being pressurized. The hydraulic pump needs to be inspected, repaired or replaced.
(3) The valve group fails.
The function of the valve group is to control the flow, pressure and movement of the machine in the hydraulic system. If the valve group fails, it will affect the normal operation of the system, resulting in the bending machine not being pressurized. The hydraulic valve needs to be inspected, repaired or replaced.
2. Transmission system failure
(1) Mechanical component failure.
The transmission system of the Press Brake is composed of multiple mechanical parts. If any of the mechanical parts fails, it will affect the normal operation of the system, resulting in the bending machine not being pressurized. The faulty mechanical parts need to be inspected, repaired or replaced.
(2) Sensor failure.
The sensor of the Press Brake is the input and output device of the control system. If the sensor fails, the control system will not work properly, resulting in the Press Brake not being pressurized. The faulty sensor needs to be inspected, repaired or replaced.
3. Cylinder seal leakage problem
When the cylinder seal is aged and worn, the cylinder will leak, causing the machine to be unable to pressurize. The cylinder seal needs to be inspected or replaced.
4. Equipment control system failure.
If the control system of the Press Brake fails, the equipment will not work properly, resulting in the bending machine not being pressurized. The equipment control system needs to be inspected and repaired.
5. Operator misoperation.
If the operator misoperates, the Press Brake will not be pressurized. The operator training and management need to be strengthened to avoid misoperation.
6. 필터 막힘.
When the filter at the oil inlet in the oil tank is clogged, the oil pump will fail and the machine will not be able to pressurize. The filter needs to be cleaned regularly.
In short, the failure of the Press Brake to pressurize may be caused by many reasons, which need to be investigated and solved from multiple aspects such as hydraulic system problems, transmission system failures and other possible reasons. Only by ensuring the normal operation of the equipment can the processing tasks be better completed and production efficiency improved. If you have any questions, you can also contact us to help you solve the machine problem.
추천 상품
핫 뉴스
-
프레스 브레이크의 압력 부족을 처리하는 방법
2024-10-15
-
프레스 브레이크를 유지하는 방법: 프레스 브레이크를 완벽한 상태로 유지하기 위한 28가지 팁
2024-10-04
-
멕시코 WC67K 80T 3200 NC 프레스 브레이크 & QC12k-6×3200 전단기
2024-09-26
-
굽힘 성형에 대한 포괄적인 가이드
2024-09-26
-
우리 공장을 방문하는 인도 고객을 환영합니다
2024-09-23
-
스테인리스 스틸 시트를 구부리는 방법은?
2024-09-20
-
사우디아라비아 WC67K 125T 3200 CNC 프레스 브레이크 & WC67K 30T 1600 CNC 프레스 브레이크 & QC12K 8×3200 전단기
2024-09-13
-
프레스 브레이크용 CNC 동심 금형의 장점은 무엇입니까?
2024-09-09
-
최고의 CNC 프레스 브레이크를 선택하는 방법(핵심 요소)
2024-09-02
-
선택 방법: 전기식 프레스 브레이크와 유압식 프레스 브레이크
2024-08-26