Najlepšie tipy na údržbu, aby váš ohraňovací lis fungoval hladko Slovensko

Hi kids! Do you want to learn about machine care? If yes, then you have come to the right spot! Well, today we are going to have a chat all about ZYCO Ohraňovacie stroje. These are crucial pieces of equipment used to form and bend metal into the desired shape. If you learn how to take care of them they will continue to work for years to come. ZYCO also knows how important machine maintenance is to ensure the proper operation of machines. Which is why we put this handy guide together for you! It will also guide you on how to properly use your press brake machine so that it remains in top notch condition. 

Key Points to Consider in Looking After Your Press Brake

Your press brake machine is an essential tool that requires regular maintenance in order to operate efficiently. Below are some general tips that you must follow to keep it up and running without a glitch:

Udržujte to čisté

Maintaining the cleanliness of your brake press machine is extremely important. Over time, dirt and dust can accumulate on it, preventing it from functioning properly. You want to wipe your machine often to keep it clean. Using a soft cloth or a brush, carefully wipe away any dirt or debris that has built up on the surface. It is a small step that will reap you huge dividends!

Oil It

And in the same way that you require food and drink to remain in great shape, your press brake machine does too — it needs oil. Oil is what makes all the pieces move without sticking. Read the user manual how to apply the oil properly. It's critical not to over-saturate the oil as this can create issues with the most delicate of the moving assemblies. A little oil goes a long way!

Check the Nuts and Bolts

The next task is checking out all the nuts and bolts on your ZYCO Hydraulický ohraňovací lis from time to time. Ensure they are nice and tight. Loose nut and bolts can cause the machine to shake and vibrate. The machine can also be less accurate when bending the metal, which can also lead to damage. It’s as simple as tightening them to keep everything running good!

Keep the Slats Clean

The slats on the press brake machine are equally important. They must be clean and clear of debris. In addition, if the slats are dirty, then the metal sheets may be difficult to move during bending. A scraper or brush can help you instruct the dirt that might be built up on the surface areas. A little bit of preparation could be all it takes to ensure that everything works well when the time comes to use the equipment. 

Ďalšie tipy na údržbu

Having shared some basic tips to help your press brake machine continue operating optimally, now are some additional maintenance tips to bear in mind:

Skontrolujte hydraulický systém

One of the most important parts of your press brake machine is the hydraulic system. It can manage the force and the working of the device. This system should be regularly checked for leaks or cracks in the hoses. And, ensure that the hydraulic fluid is always at a correct level. The body of the machine which needs this system in good servicing, is crucial in way the machine system works.

Check the Clutch and Brake

While maintenance of each part of your press brake machine is very important, the clutch and brake are particularly critical to check frequently. Check for signs of wear and tear, such as cracks or breaks. If you see any damage, get those replaced immediately. To avoid further problems and ensure your machine remains safe to use.

Skladujte to správne

Storing your press brake machine: When not in use Ensure that it is stored in a clean and dry area. This protects it from the dust and moisture that can lead to damage. When the machine is not being used, you can use dust covers to protect it from dirt and dust. Just this simple act can keep it from dying. 

How to Maintain Your Press Brake Machine?

Maintenance on your bending machine will increase life expectancy and efficiency. So what can you do to make sure you are taking care of it?

Make a Maintenance Schedule

Building a maintenance schedule can be useful. A routine that must include periodic checks of all key components of your press brake machine. Scheduling these checks will ensure that you won't forget about them and that you will stay on top of critical maintenance tasks. This helps to solve any significant problems and maintain the system functioning properly.

Postupujte podľa návodu na použitie

Whenever it comes to maintenance tasks always consult the user manual of your press brake machine. The manual will tell you exactly how to oil the machine, tighten bolts, and do other necessary things. All of these recommendations are important for maintenance of your machine to ensure it is working optimally.

Sledujte varovné signály

Being aware of pressing brake machine warning signs that indicate your press brake may not be functioning properly is essential. If you hear anything strange, feel anything funny, or notice anything else that seems off, cease use of the machine immediately. Seek professional assistance to resolve. Catching problems early can spare you a lot of headaches down the line. 

Important Maintenance Tasks

However, there are certain maintenance tasks that you cannot afford to neglect the care of your press brake machine. These tasks are important for ensuring that it runs smoothly:

olejovanie

Your machine should be oiled regularly to ensure that it functions properly. It is essential to refer to the user manual for the appropriate oiling procedure. We will help you make sure you’re doing it correctly and have everything well lubricated.

čistenie

Press brake cleaning is just as important as keeping your rooms clean. Regularly clean it to prevent dust and debris from accumulating on the machine over time. This is crucial in terms of the maintenance. 

Tightening Nuts and Bolts

Checking and tightening nuts and bolts is a really READ MORE Frequent checks will eliminate the risk of loose parts; which can damage the machine. If you can take a few minutes to do this, it will prevent you from greater issues down the line.

At ZYCO, it is our conviction that the way to maintain the seamless operation of your press brake machine is through the simple act of servicing it. These helpful tips will ensure that your ZYCO Ohraňovací lis pre hydraulický lis stays clean, runs smoothly, and continues to create the precise bends that you need in the metal!