Výber správnej tonáže pre váš hydraulický ohraňovací lis Slovensko

What is a Press Brake?

There are specialized machines called press brakes that are instrumental in bending metal or other materials into various shapes. These are the essential tools that provide a lot of advantages for factories and metalworking industries. There are many types and sizes of press brakes to suit different needs. Selecting of the correct tonnage is very crucial when anyone uses a hydraulic press break. This decision protects everyone and makes sure the Stroj na ohýbanie plechov functions properly. ZYCO, a leading hydraulic press brake manufacturer, will assist in our crack of the press brake tonnage conundrum. And they’ll ground us in how to selection your proper tonnage for your work.

Čo je tonáž?

The tonnage refers to the amount of force that a hydraulic press brake has at its disposal to bend metal into the desired shape. This feature is measured in tons. Press brake tonnage can range anywhere from 20 tons to over 10,000 tons! How thick, wide and strong the metal is makes all the difference in how much tonnage you need. This means that the bigger the tonnage, the more it can bend technically without any issues thicker and stronger materials.

Choosing the Right Tonnage

There are a few key considerations when selecting the appropriate tonnage for your press brake that are important for the process to go off without a hitch:

Material Thickness and Type: You need to be aware of the thickness of the material you wish to bend. The thicker the material, the more tonage you will require. This will determine how much tonnage is required by taking the thickness of the material and multiplying it by the tonnage required per foot of the same type of material. This calculation prevents you from putting too much work into the same machine.

Type of tooling: The tools you use are also really important and can alter on how much tonnage that you require. It takes a different tonnage to bend the same thick material with different types of tooling. For example, with a tool designed for heavier material, using a tool specific for lighter material would not require as much tonnage.

Type of Bend: How long the bend you need to make is yet another factor. If you have to create a long bend, you need more tonnage to give you that. If the bend is too long, then the deformation will require a lot of force to ensure correct shaping of the metal.

Tonnage: This is the amount of pressure that can be applied by the hydraulic system. For instance, a mechanical press brake might have different limitations than one that is hydraulic. It helps you realize how much tonnage you can safely handle with the kind of machine you got.

The Importance of Matching Tonnage to Material

Getting the tonnage right to the material thickness is critical, both for safety and efficiency. Over-tuning it runs the risk of being very unsafe. A hydraulic CNC ohraňovací lis that is overworked may end up causing damage to the machine and even injury to the operator. Conversely, not using enough tonnage for the material thickness can result in defects in your bends. This may also destroy the material you are attempting to form. This way you ensure that working conditions are safe, the bends are of good quality, and the tools will last longer.

Bežné chyby, ktorým sa treba vyhnúť

Below you find some of the most common mistakes when choosing tonnage for a hydraulic press brake: How about one more common mistake we see: Undercutting the tonnage. This can make for some gory accidents and also destroy tooling and the machine if you overestimate the required tonnage. Another common error is assuming that a higher tonnage is required. If you're overestimated, you can waste money on a machine and really hurt your budget. When avoiding these mistakes, it is important to speak with an expert in the industry. They are trained to calculate your tonnage needs, so you can make informed decisions about your work.

The Right Tonnage: Making Work Better

Choosing the correct tonnage for a hydraulic press brake is crucial to performing bending operations efficiently. Choosing the right tonnage also prolongs the life of your Ohýbačka kovov and tooling. So you won’t have to replace them as frequently — which over time can save you some money. It also minimizes material waste because when you use the right tonnage, you are maximizing the use of the materials you have. It also allows you to play better bends overall. Using the right tonnage allows you to reduce the downtime for maintenance and repairs. This is because less errors and malfunctions will happen, usually caused by overloading or underloading the equipment.

záver

The appropriate tonnage rate is vital for the proper functioning of the hydraulic press brake and the production of excellent bending operations. Studying Tonage as a hydraulic press brake manufacturer, ZYCO is one of the most professional hydraulic press brake manufacturer, and knows how important for a hydraulic brake press manufacturer to understand about the tonnage. They help you to consider the elements that affect your choice. Ensure work tonnage suits material thickness and common errors in tonnage selection. Making well-informed tonnage decisions will help maximize efficiency and safety while minimizing downtime and delivering high-quality bends for your operation. Knowing this will allow you to garden more efficiently and effectively in your metalworking.